GSM Alarm for Burglarproof (KL-H21B)

Function & Feature
1. GSM 900/1800/1900 bands, can be used in most parts of the world
2. Full duplex communication with the host
3. Monitor the scene environment
4. Voice and message alert
5. SMS order control main unit
6. SMS modify the zone name freely
7. Set alarm ON or OFF by remote controller
8. Can set Home Arm and Out Arm mode
9. Call in to set alarm ON, OFF, Monitor, Output, Intercom.
10. Send SMS to set alarm ON, OFF, Monitor, Output
11. 5 group phone + room number + 1 group alarm monitor center phone number
12. 2 group phone to report arm and disarm status
13. Can program 7 groups of alarm messages
14. 3 zones for wired detector
15. 16 zones for wireless detector
16. 2 outputs, can be used with external circuit to control home appliance
17. Easily set ON or OFF for every wired or wireless detector
18. SMS inform if external power failure or recovery

Specification
SOME TECHNIQUE PARAMETER
1) Static current: 20mA
2) Power: 9V-12V DC
3) Working temperature: -20degree Celsius- +85degree Celsius
4) GSM850/900/1800/1900MHz band
5) Receiving code: ASK
6) Frequence: 315/433/868/915MHz
7) wireless distance: 100 M
8) wireless detectors: 16
9) wire detectors: 3
Outer Alarm Siren
Volume: 110 dB
Working Condition: Temperature -10 degree Celsius+ 40 degree Celsius
Humidity ≤ 90% rh
Wireless Gap Detector (Door / Window Contact)
Power Supply: DC12V (inner 12V battery)
Static Current: ≤ 20 mA
Transmission Current: ≤ 15mA
Transmission Frequency: 315/433MHz± 0.5MHz
Transmission Distance: No obstacle 80m
Internal Distance: 15 mm
Working Condition: Temperature -10degree Celsius+ 40 degree Celsius
Humidity ≤ 90% rh
Wireless P. IR Detector
Power Supply: DC9V (inner 9V battery)
Static Current: ≤ 100 mA
Transmission Current: ≤ 20mA
Transmission Frequency: 315/433MHz± 0.5MHz
Transmission Distance: No obstacle 80m
Detective Speed: 0.3 - 3m/s
Detective Distance: 5 - 12m
Detective Range: Horizontal 110° Vertical 60°
Working Condition: Temperature -10 degree Celsius+ 40 degree Celsius
Humidity ≤ 90 rh
Remote Control
Power Supply: DC12V (inner DC12V battery)
Transmission Current: ≤ 15mA
Transmission Frequency: 315/433MHz± 0.5MHz
Transmission Distance: No obstacle 80m
Strandard packing list
Alarm main unit x 1 PC.
Wireless PIR detector x 1 PC.
Wireless door (gap) sensor x 1 PC.
Remote controller x 2 PCS.
Antenna x 1PC.
Mini wired siren 110dB/0.3m x 1 PC.
Power supply with back-up x 1PC.
Installation/user manual x 1PC.
Connecting switched output devices (Home-appliance Control)
Three open outputs (O1, O2 and O3) and one internal relay controlled by telephone are available.
Internal onboard relay is activated when an alarm occurs and can be deactivated / reactivated through telephone commands or SMS text message.
It can be used, for example, to command an external light.

Open outputs can be used directly if your equipment can operate a relay. Do connect an anti parallel diode with relay coil. These outputs can be operated only by telephone or SMS text message commands.
Wiring Explanation: For home-appliance control (for special order)
The controller box has four wires:
1. Two-yellow AC 220 wires to be connected with Home appliance.
2. GND, +12V DC wires to be connected with a 12V DC (Power supply)